Table of Contents
Advertisement
INSTRUCTION FOR USE
FEATURES
Special features for VCD playback only
Adjusting your TV System
Before viewing the Video CD, ensure that the set is switched to the corre-
sponding PAL or NTSC system of your TV set (except multi-system TV).
1
Connect the audio/video output cable to the corresponding ports of the TV set.
2
Turn on your TV system and adjust the input mode to AV
3
On the remote control, press P/N to toggle between PAL and NTSC TV systems.
OSD - On Screen Display
If you insert a VCD, your TV screen will serve as an additional display for
messages (e.g. PLAY, STOP) and information stored in the VCD.
• Press OSD on the remote control or DISPLAY on the set repeatedly to switch
OSD on or off.
When OSD is switched on, your TV screen may for example display the follow-
ing
XX-MM:SS - where:
– "XX" is the current track
– "MM" is for minute.
– "SS" is for second.
DISPLAY features for VCD, CD and MP3-CD
• During normal playback, you can press OSD on the remote control or
DISPLAY on the set repeatedly to select your desired display.
Press OSD or DISPLAY
1x
Track number + track's remaining playing time
2x
Normal display
1-4
OSD
Display
FEATURES
Return
If you want to return to MENU PLAY (the main menu at the
beginning of your VCD) during SEQUENCE PLAY, press
RETURN.
Go to
1
Press GO TO on the remote control.
GO TO--:-- appears on the TV screen.
Enter the desired time from which you want to start playback.
2
Press GO TO again to deactivate GO TO.
GO TO CANCEL appears.
View
This feature allows you to scan through your VCD in 9
segments.
1
Press VIEW to divide the whole movie of the video into 9
segments.
The 7-second of each segment is played. After the last
segment, playback starts from the first segment.
2
Select your desired segment using the number buttons on the remote control.
Playback continues from the selected segment.
Press VIEW again or 2; to resume normal playback.
3
Zoom
1
Press ZOOM on the remote control once to enlarge the picture by 2 times.
2" appears.
ZOOM
2
Press ZOOM again to quit the zoom feature.
appears and normal playback resumes.
RESTORE
Slow
Select from 4 speeds to capture action in slow motion: 1/2, 1/4, 1/8, and 1/16.
1
Press SLOW on the remote control once or more for playback at slow speed.
Sound is muted and SLOW1/2, SLOW1/4, SLOW1/8 or
SLOW1/16 is displayed.
To resume normal playback, press 2;.
2
Playing a VCD V2.0 with PBC
PBC is a predefined play sequence stored in the CD.
SEQUENCE PLAY is by default on when VCD playback starts.
Before viewing your VCD, make sure the set is switched to the corresponding
PAL or NTSC system of your TV set (except multi-system TVs).
1
Press P/N repeatedly to select PAL or NTSC.
is displayed when you load a VCD with PBC
(Playback Control) into your player.
2
You can press PBC to toggle between MENU PLAY and
SEQUENCE PLAY.
If SEQUENCE PLAY is selected, the playback starts from
the beginning of the first track.
If MENU PLAY is selected, a list of tracks is displayed on the TV screen.
TIP:
This function is not available for discs without Table Of Contents.
RETURN
GO TO
VIEW
ZOOM
SLOW
P/N
PBC
Advertisement
Table of Contents
