Precautions - Technics RS-TR575 Operating Instructions Manual

Precautions
Before using this unit please read these operating Instructions
carefully. Take special care to follow the warnings indicated on
the unit itself as well as the safety suggestions listed below.
Afterwards keep them handy for future reference.
Safety
1.
Power Source - The unit should be connected to power sup­
ply only of the type described in the operating instructions or
as marked on the unit.
2. Polarization -- " the unit is equipped with a polarized AC
power plug (a plug having one blade wider than the other).
that plug will fit Into the AC outlet only one way. This is a safe ­
ty feature. " you are unable to insert the plug fully into the
outlet, try reversing the plug. " the plug should still fail to
lit,
contact your electrician to replace your obsolete outlet. Do
not defeat the safety purpose of the polarized plug .
3.
Power Cord Protection -- AC power supply cords should be
routed so that they are not likely to be walked on or pinched
by items placed upon or against them. Never take hold of the
plug or cord if your hand is wet, and always grasp the plug
body when connecting or disconnecting it.
4. Nonuse Periods -- When the unit is not used, turn the power
off. When left unused for a long period of time. the unit should
be unplugged from the household AC outlet.
Installation
Environment
1.
Water and Moisture - Do not use this unit near water -for ex­
ample, near a bathtub, washbowl, swimming pool, or the like.
Damp basements should also be avoided.
2. Heat - The unit should be situated away from heat sources
such as radiators and the like. It also should not be placed in
temperatures less than 5' C (41' F) or greater than 35' C
(95'
F).
Placement
1. Ventilation - The unit should be situated so that its location
or position does not interfere with its proper ventilation. Allow
10 cm (4") clearance from the rear of the unit.
2, Foreign Material _. Care should be taken so that objects do
not fall Into and liquids are not spilled into the unit. Do not sub­
ject this unit to excessive smoke, dust. mechanical vibration,
or shock.
3. Magnetism - The unit should be Situated away from equip­
ment or devices that generate strong magnetism.
4, Stacking - Do not piace heavy objects, other than system
components, on top of the unit.
5. Surface - Place the unit on a flat, level surface.
fl. Cart. and Stands - The unit should be used only with a cart
or stand that is recommended by the manufacturer.
The unit and cart combination should be mov ­
<I
ed with
care.
Quick stops, excessive force, and uneven
surfaces may cause the unit and cart com­
bination to overturn.
7. Wan or Ceiling Mounting - The unit should not be mounted
to a wall or ceiling, unless specified in this operating instruc ­
tions.
-
-~
..
Maintenance
(See page 21.)
Clean the cabinet, panel and controls with a soft cloth lightly
moistened with mild detergent solution.
Do·not use any type of abrasive pad. scouring powder or solvent
such as alcohol or benzine.
Service
1. Damage Requiring Service -- The unit should be serviced by
qualified service personnel when:
(a) The AC power supply cord or the plug has been damaged;
or
(b) Objects have fallen or liquid has been spilled into the unit;
or
(c) The unit has been exposed to rain; or
(d) The unit does not appear to operate normally or exhibits a
marked change in performance; or
(e) The unit has been dropped, or the enclosure damaged.
2.
Servicing -- The user should not attempt to service the unit
beyond that described in the operating Instructions. All other
servicing should be referred to qualified service personnel.