Selecting The Right Colour System; Using The Remote Control - Panasonic TX-76PW150A Operating Instructions Manual

POS. Setup
COLOUR SYS
If a clear picture with correct colours cannot be obtained, a change to the Colour System may improve the picture.
The COLOUR SYS options are AUTO, PAL, NTSC 4.43 and NTSC 3.58. The OLOUR SYS is normally set to AUTO
and generally does not need to be changed.

Using the Remote Control

1. Push the MAIN MENU button.
Move to the PRESET Menu using the Up or
Down button.
2. Choose the PRESET Menu by using the
Left or Right buttons.
3. Move to the POS Setup menu using the Up
or Down button.
4. Choose the POS Setup menu using the Left
or Right buttons.
5. Using the Up or Down button to Choose the
COLOR SYS option.
6. Use the Left or Right buttons to change the
COLOUR SYS option.
7. Push the MAIN MENU button repeatedly
until you return to normal viewing.
RF (Normal television) MODE
AV (Audio / Video) MODE
26
PRESET
AUSTRALIA
SELECT
SYS
ACCESS
TUNE
AUTO
ACCESS
TUNE
MANUAL
ACCESS
POS SETUP
ENGLISH
SELECT
TEXT
GEOMAGNETIC --------|-------
POS. SETUP
COLOUR SYS AUTO
FINE TUNE ACCESS
OFF
SKIP
ON
AVL
-----------|-----------
CH COLOUR SET
SETUP
PRESET
AUTO
COLOUR SYS
ON
AVL
-----------|-----------
SET
CH COLOUR
-----------|-----------
GEOMAGNETIC
Using the Front Panel Controls
1. Open the front door.
2. Press the PRE. button repeatedly until
POS.SETUP is highlighted.
3. Choose the POS.SETUP Menu by using
the Volume Up (+) or Down (-) buttons.
4. The COLOR SYS option will be highlighted
5. Use the Volume Up ( + ) or Down ( - )
buttons to change the COLOUR SYS
option.
6. Push the PRE. button repeatedly until you
return to normal viewing.