Tuner Menu - Shure GLX-D User Manual

Tuner Menu

Enter tuner mode by pressing the footswitch.
In tuner mode, the controls will only affect tuner functions, RF and audio settings are not affected.
Note: The audio signal does not pass through the tuner, eliminating the need for bypass switches commonly found on wired tuners.
Tuner Options
• Indicator: Needle or Strobe
• Output: Live, Mute, or Both
• Display Brightness
• Detune
• Sharps and Flats
• Reference Pitch
Indicator: Needle or Strobe
The tuner indicator can be set to display a needle style or strobe style.
Needle
A single LED will illuminate on
the tuning bar to indicate sharp
or flat. The green center LED
will illuminate when the note is
in tune.
Note: Indicator and Output settings are displayed in a scroll from left to right.
Choosing Live or Mute Audio Output
The following modes are available to set the audio output to Live or Mute
when the footswitch is pressed in tuner mode.
Note: Text for the output settings are displayed in a scroll from left to right.
Mode Footswitch Function
Receiver Display (audio Live)
Live
Receiver Display (audio Live)
Mute
Tuner Display (audio Mute)
Both
*Note: In Both
mode, the pedal powers up in Receiver Display. Press the footswitch
to enter tuner mode.
Display Brightness
The receiver has a built-in light sensor to automatically adjust the display
brightness.
To manually adjust the brightness choose one of the following settings:
*A = automatic *1 = low
Selecting and Editing Tuner Menu Settings
Use the following buttons to select and edit the tuner
menu settings:
• Use the mode button access the menu and to
scroll between menu settings
• Use the Use ▲ ▼ buttons to change a menu
parameter
• Use the footswitch to enter and save parameter
changes
Strobe
A sequence of three LEDs will travel
across the tuning bar in the direction of
sharp or flat. The LEDs will remain sta-
tionary when the note is in tune.
Tuner Display (audio Live)
↔
Tuner Display (audio Mute)
↔
Tuner Display (audio Live)*
↔
*2 = medium *3 = high
Detune
The tuner can be set to display standard tuning for instruments that have
been detuned up sharp or flat in the following increments:
• Up to 5 steps sharp (#1-#2 -#3-#4-#5)
• Up to 6 steps flat (b6-b5-b4-b3-b2-b1)
The notation for standard tuning is b0
b0
= Standard Tuning
* dot appears on the display as a reminder that the pedal is detuned.
Sharps and Flats
Adds sharp or flat symbols to the display of non-natural notes.
Sharps and Flats
Reference Pitch
The reference pitch can be offset from standard A440 in a range of 432 Hz
to 447 Hz in 1 Hz increments.
When adjusting the pitch, the last 2 digits of the value will be displayed.
For example, "32" would appear on the display when the pitch has been
set to 432 Hz.
432 Hz
A dot appears on the display as a reminder that the reference pitch has been offset.
link group
mode auto rf channel
Example of note displayed in Detune
mode
Flats only Sharps only
A440 447 Hz
11