I. Fixing of earth leads of W105 and W110(HD-A1/D1)
W105 (50mm) in a hole (W102) for the earth lead on the USB PC board from the component side and solder W105 on the
solder side.
W105
Fig. 2-2-11
Draw out W105 from the upper side of USB PC board toward you and connect W105 with W110.
Fix W110 in the same manner as is done on the HD-XA1.
W105
W105
W110
W110
Fig. 2-2-12
Fig. 2-2-13