Samsung CC24BTVA/UMG Service Manual page 24

Disassembly and Reassembly
No Parts
4-5
Procedure
4) Disassemble the Rubber Cap Drain
Socket to remove the water on the Cushion
Drain.
(Prepare something like a gutter to put the
water in.)
* In this point, you can check the Drain
Pump Impeller operates well or not.
5) Loosen eight bolts in the mark
* At first, there are 2 bolts per one corner
and when reassembly, there should be at
least 1 bolt per one corner fastened.
* 2 Bolts per one corner recommended..
6) Disassemble the Drain Cushion from the
main body.
7) Loosen the nut
.
Remark
Samsung Electronics