Janome stirling Manual page 16

AFTER SALES SUPPORT
AUS 1300 526 663
16
AUS Hotline Costs
Setting Spool Pins
(Fig. 1)
The spool pins are used for holding the spool of
thread in order to feed thread to the machine.
To use, pull up the spool pin. Push down for storage.
Removing or Inserting the Bobbin Case
(Fig. 2)
Open the hook cover.
q
Raise the needle by turning the handwheel toward
you. Take out the bobbin case by holding the latch.
w
When inserting the bobbin case, place the horn into
e
the recess of the hook race.
(Fig. 1)
q Hook cover
w Latch
e Horn
MODEL: 311 PRODUCT CODE: 52829 04/2016
(Fig. 2)
enquiries@esqaustralasia.com.au