Front Panel Usb - HP ProLiant ML150 Gen9 Maintenance And Service Manual

Disconnect the front LED cable from the system board.
9.
Remove the front panel LED module:
10.
Remove the front panel LED module screw.
a.
Pull the LED module out of the server.
b.
To replace the component, reverse the removal procedure.

Front panel USB

To remove the component:
Unlock and remove the tower bezel
1.
Power down the server (on page 23).
2.
Remove all power:
3.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
("Remove the tower bezel" on page 23).
Removal and replacement procedures 31