Comfort Adjustments; Tiller Angle Adjustment; Seat Height Adjustment - Pride Celebrity XL Owner's Manual

V I I . C O M F O R T

TILLER ANGLE ADJUSTMENT

You can adjust the tiller infinitely between the forward stop and the scooter deck.
WARNING! Remove the key before
adjusting the tiller. Never attempt to
adjust the tiller while your scooter is in
motion.
1. Pull up on the tiller adjustment lever. See figure 10.
2. Move the tiller to a comfortable position.
3. Release the tiller adjustment lever. The tiller will remain
in that position.
NOTE: In order to lower the tiller to the scooter deck,
you must first remove the seat and both batteries. See
VIII. “Disassembly and Assembly.”

SEAT HEIGHT ADJUSTMENT

The seat can be repositioned to one of three different heights. See figure 11.
1. Remove the seat from your Scooter. See VIII. “Disassembly and Assembly.”
2. Use the attached ring to pull and remove the ball detent pin from the seat post tower.
3. Raise or lower the seat post to the desired seat height.
4. Hold the seat post at that height and match up the holes in the seat post with the seat post tower.
5. Fully insert the ball detent pin.
6. Replace the seat.
POWER SEAT ACTUATOR (OPTIONAL)
Your Celebrity XL may be equipped with a power seat actuator. The actuator raises and lowers the seat automatically.
See figure 12.
WARNING! The power seat actuator is
intended for operation only while the
vehicle is stationary and on a level
surface. Its purpose is to aid you in
reaching objects.
Strict adherence to the following safety
rules is vital to your safety:
n
Do not attempt to raise or lower the
seat while in motion!
n
Do not operate your Scooter with the
power seat elevated!
n
We recommend you drive the vehicle
only with the seat in the lowest
position.
Celebrity XL
A D J U S T M E N T S
Figure 10. Tiller Adjustment
SEAT POST TOWER
Figure 11. Seat Height Adjustment
SEAT POST
BALL DETENT PIN
23