Installing the refrigerator
If you have to use a roof vent instead of the air outlet vent:
➤ Cut out a section in the roof. Refer to the roof vent instruction manual for
the required dimensions. When doing so, observe the information, see
chapter "Preparing the installation" on page 17.
6.4
Installing the ventilation grille
No. in
fig. 0, page 5
1
2
3
4
➤ Ensure the installation frame is water resistant (fig. a, page 6).
➤ Insert the installation frame and screw it down tightly (fig. b, page 6).
➤ Fit the ventilation grille (fig. c, page 6).
➤ Insert the slider and lock the ventilation grille with it (fig. c, page 6).
6.5
Install the roof vent
No. in
fig. d, page 6
1
2
➤ Ensure the installation frame is water resistant (fig. e, page 7).
➤ Insert the installation frame and screw it down tightly (fig. e, page 7).
➤ Insert the hood and screw it down tightly (fig. f, page 7).
20
Description
Installation frame
Ventilation grille
Winter cover
Slider
Description
Installation frame
Hood
RML9330 – RML9435
EN