Fein KBM52U Instruction Manual page 16

3 41 01 063 06 0.book Seite 16 Donnerstag, 12. Mai 2005 8:42 08
EN
Special safety instructions.
Secure the power tool with the clamping strap
supplied if there is danger of it falling, especially
for work carried out at a height, on vertical con-
struction elements or above the head.
If work is carried out on vertical construction ele-
ments or above the head, prevent any fluid (cool-
ant) from penetrating the power tool.
Avoid touching the drilled core that is automati-
cally ejected by the centering pin when the work-
ing procedure is finished.
Operate the power tool only from earthing contact
sockets that comply with the specifications. Do
not use any connection cables that are damaged;
use extension cables with an earthing contact that
are checked at regular intervals.
Do not rivet or screw any name-plates or signs
onto the power tool.
Wear personal protective equipment. Depending
on the application, use a face shield, safety gog-
gles or safety glasses. Wear ear protection.
Do not use accessories which are not specifically
designed and recommended by the power tool
manufacturer.
Clean the ventilation openings on the power tool at
regular intervals. The motor blower draws dust
into the housing.
The guard protecting against chippings and acci-
dental contact must always be mounted during
operation.
At a glance.
1 Coolant container
2 Capstan handle
3 Depth scale
4 Magnetic foot
5 Slit for the clamping strap
6 Guard protecting against chippings and acci-
dental contact
7 Gear switch
8 Fixation screw for coolant container
9 Motor switch
10 "Slow" button
11 Main switch
12 Coolant stopcock
13 Lever for setting the stroke range
14 Tool holder (Quick IN)