Dell Vostro 15-5568 Owner's Manual page 65

SATA Operation
Adapter Warnings
Function Key Behavior
Intel Smart Connect
Technology
Intel Rapid Start Technology
Miscellaneous Devices
Battery Health
Table 7. Security
Set Asset Tag
Set Admin Password
Set System Password
Set HDD Password
Password Change
Password Bypass
Table 8. Boot
Boot Priority Order
Windows Boot Manager
Secure Boot
Add Boot Option
Delete Boot Option
Exit
This section allows you to save, discard, and load default settings before exiting from System Setup.
Change the SATA controller mode
to either ATA or AHCI.
Enable or disable the Adapter
Warnings.
Specifies the behavior of the
function key <Fn>.
Enable or disable Intel Smart
Connect Technology.
Enable or disable Inter Rapid Start
Technology.
These fields let you enable or
disable various on-board devices.
Displays a message about the
battery health.
This field displays your system's asset tag. If the asset tag is not already
set, this field can be used to enter it.
Allows you to change or delete the administrator password.
Allows you to change or delete the system password.
Allows you to set a password on the computer's internal hard drive
(HDD).
Allows you to change the security password.
Allows you to bypass the system password and the internal HDD
password prompts during a system restart/resume from hibernate
state.
Specifies the order of different devices in which the
computer will boot through at start up.
Allows windows to search for a hard drive with
windows files and boot from it.
Species if the UEFI secure boot option is enabled
or disabled.
Allows the user to add an additional boot device.
Allows the user to remove an existing boot device
from the boot order.
Default: AHCI
Default: Enable
Default: Function key
Default: Enable
Deafult: Enable
65