Installing The Base Cover; Hard Drive; Removing The Hard Drive Assembly - Dell Vostro 15–3568 Owner's Manual

Installing the base cover

1 Align the base cover with the screw holders on the computer.
2 Press the edges of the cover until it clicks into place.
3 Tighten the screws to secure the base cover to the computer.
4 Turn the computer over.
5 Open the computer and connect the optical drive connector to the system board.
6 Tighten the screws to secure the base cover to the palmrest.
7 Install the:
a keyboard
b optical drive
c battery
8 Follow the procedure in

Hard drive

Removing the hard drive assembly

1 Follow the procedure in
2 Remove the:
a battery
After working inside your
Before working inside your
computer.
computer.
Removing and installing components 22