D-Link DGS-3224TGR User Manual page 54

SNMP Host Table
Use the SNMP Host Table to set up trap recipients.
To delete an existing entry, click the selection button in the right-hand column that corresponds to the
port you want to remove. To create a new entry, click the New button, a separate window will appear.
The following parameters are used in the SNMP Host Table windows:
Parameter
DGS-3224TGR Gigabit Ethernet Switch User's Guide
Figure 6- 15. SNMP Host Table window
Figure 6- 16. SNMP Host Table – Add window
Host IP
SNMP Version
Auth. String
Description
Type the IP address of the remote
management station that will serve
as the SNMP host for the switch.
From the pull-down menu select:
V1 – To specifies that SNMP version
1 will be used.
V2c – To specify that SNMP version 2
will be used.
V3 – To specify that the SNMP
version 3 will be used.
Type in the community string or
SNMP V3 user name as appropriate.
44