Digital Conversion Method; Operations Of Digital Conversion Methods - Mitsubishi Electric MELSEC-Q series User Manual

4.5

Digital Conversion Method

One of the following digital conversion methods can be set for each channel.
• Sampling processing
• Averaging process
• Primary delay filter
For the operation of each digital conversion method, refer to the following.

• Operations of digital conversion methods (

For the setting procedure for each digital conversion method, refer to the following.
• Setting procedures for digital conversion methods (
4.5.1
Operations of digital conversion methods
(1) Sampling processing
CT input values are converted to digital values in each set sampling cycle. The converted values are stored as
digital output values in the buffer memory.
(2) Averaging process
Digital output values are averaged for each channel. The averaged values are stored as digital output values in
the buffer memory.
There are three types of averaging process as follows:
• Time average
• Count average
• Moving average
36
Page 36, Section 4.5.1)
Page 41, Section 4.5.2)