Ii-1-1-1 Wan1(Adsl/Vdsl2) - Draytek VigorNIC 132 series User Manual

I I - 1 - 1 - 1 W
I I - 1 - 1 - 1 W
Vigor device will detect the physical line is connected by ADSL or VDSL2 automatically.
Therefore, this page allows you to configure settings for ADSL and VDSL2 at one time. That is,
it is not necessary for you to configure different profile settings for ADSL and VDSL2
respectively.
Available settings are explained as follows:
Item
Enable
Display Name
Physical Mode
DSL Mode
Physical Type
VLAN Tag insertion (ADSL)
24
A N 1 ( A D S L / V D S L 2 )
A N 1 ( A D S L / V D S L 2 )
Description
Choose Yes to invoke the settings for this WAN interface.
Choose No to disable the settings for this WAN interface.
Type the description for such interface.
Display the physical mode of such interface. If VDSL2 is
detected, this field will display "VDSL2"; if ADSL is
detected, it will display "ADSL".
Specify the physical mode (VDSL2 or ADSL) for such router
manually.
For such interface, no type can be selected.
The settings configured in this field are available for ADSL.
Enable – Enable the function of VLAN with tag.
The router will add specific VLAN number to all packets on
the WAN while sending them out.
Please type the tag value and specify the priority for the
packets sending by WAN1.
Disable – Disable the function of VLAN with tag.
Tag value – Type the value as the VLAN ID number. The
range is form 0 to 4095.
Priority – Type the packet priority number for such VLAN.
The range is from 0 to 7.
VigorNIC 132 Series User's Guide