Iv-1-5 Syslog/Mail Alert - Draytek VigorNIC 132 series User Manual

I V - 1 - 5 S
I V - 1 - 5 S
SysLog function is provided for users to monitor router.
Available settings are explained as follows:
Item
SysLog Access Setup
Router Name
Mail Alert Setup
140
y s l o g / M a i l A l e r t
y s l o g / M a i l A l e r t
Description
Enable - Check Enable to activate function of syslog.
Syslog Save to – Check Syslog Server to save the log to Syslog
server.
Display the name for such router configured in System
Maintenance>>Management.
If there is no name here, simply lick the link to access into
System Maintenance>>Management to set the router name.
Server IP Address -The IP address of the Syslog server.
Destination Port - Assign a port for the Syslog protocol.
Enable syslog message - Check the box listed on this web
page to send the corresponding message of firewall, VPN,
User Access, Call, WAN, Router/DSL information to Syslog.
Check Enable to activate function of mail alert.
Send a test e-mail - Make a simple test for the e-mail
address specified in this page. Please assign the mail address
first and click this button to execute a test for verify the mail
address is available or not.
SMTP Server/SMTP Port - The IP address/Port number of the
SMTP server.
Mail To - Assign a mail address for sending mails out.
Return-Path - Assign a path for receiving the mail from
outside.


Use SSL - Check this box to use port 465 for SMTP server
for some e-mail server uses https as the transmission
method.
Authentication - Check this box to activate this
VigorNIC 132 Series User's Guide