Mechanical Instructions - Philips S42AX-YD04 Service Manual

4. Mechanical Instructions

Index of this chapter:
4.1 Dis-assembling / Re-assembling
4.1.1 Flexible Printed Circuit of Y-Buffer (Upper and Lower)
4.1.2 Flat Cable Connector of X-main Board
4.1.3 Assembling & Disassembling FFC and TCP Cables from
their Connectors
4.1.4 Exchange of LBE and LBF board - 42" HD W2
4.1.6 Exchange of LBE and LBF board - 50" HD W2
4.1.8 Exchange YB and YM board - 42" HD W2 & 42" HD W2
Plus
4.1.9 Exchange YB and YM board - 50" HD W2 & 50" HD W2
Plus
Mechanical Instructions
4.1
4.1.1
Figure 4-1 Dis-assembly FPC of Y-buffer
Figure 4-2 Re-assembly FPC of Y-buffer
SDI PDP 2K7
Dis-assembling / Re-assembling
Flexible Printed Circuit of Y-Buffer (Upper and Lower)
• Dis-assembly: Pull out the FPC from the connector by
holding the lead of the FPC with both hands.
• Re-assembly: Push the lead of the FPC with equal force on
both sides into the connector.
Note: Be careful not to damage the connector pins during
connecting.
4. EN 11
G_16380_012.eps
190606
G_16380_013.eps
190606