Technical Data; Warranty Disclaimer - HELIX DSP PRO Manual

Technical Data

Inputs ...............................................................................8 x RCA / Cinch
Input sensitivity ................................................................RCA / Cinch 2 - 4 Volts (adjustable) -
Outputs ............................................................................10 x RCA / Cinch
Output voltage .................................................................6 Volts RMS
Frequency response ........................................................10 Hz - 44,000 Hz
DSP resolution .................................................................64 Bit
DSP processing power ....................................................295 MHz (1.2 billion MAC operations/second)
DSP type .........................................................................Audio signal processor
Signal converter...............................................................A/D: Asahi Kasei
Signal-to-noise ratio - digital input ...................................116 dB (A-weighted)
Signal-to-noise ratio - analog input ..................................108 dB (A-weighted)
Total harmonic distortion (THD+N) - digital input .............< 0.0006%
Total harmonic distortion (THD+N) - analog input ...........< 0.001%
IM distortion (IMD) - digital input......................................< 0.002%
IM distortion (IMD) - analog input ....................................< 0.006%
Crosstalk..........................................................................> 90 dB
Operating voltage ............................................................9.6 - 18 Volts, short drops (up to 5 sec.) down to
Current draw ....................................................................450 mA
Additional features ...........................................................Control Input, USB, ground lift switch, HEC Slot
Dimensions (H x W x D) ..................................................40 x 177 x 150 mm / 1.58 x 6.97 x 5.91"

Warranty Disclaimer

The limited warranty comply with legal regulations.
Failures or damages caused by overload or improp-
er use are not covered by the warranty.
Please return the defective product only with a
valid proof of purchase and a detailed malfunction
description.
Technical specifications are subject to change!
Errors are reserved!
8 x Highlevel speaker input
1 x Optical SPDIF (12 - 96 kHz)
1 x Coax SPDIF (12 - 192 kHz)
1 x Remote in
default 4 Volts
Highlevel 5 - 10 or 10 - 20 Volts (corresponds
to 6 - 100 Watts RMS - not max. power) -
default 10 Volts
1 x Remote out
D/A: Analog Devices
6 Volts acceptable
For damages on the vehicle and the device, caused
by handling errors of the device, we can't assume
liability.
All HELIX products are tagged with a E-Certifi-
cation number and also a CE-Certification mark.
Thereby these devices are ceritified for a use
inside vehicles inside the European Union (EU).
23