Table of Contents
Advertisement
Symptom
The screen was tapped,
but there is no response.
The operation button
does not work, either.
The screen is dark.
The screen is hard to see. The brightness
Cannot connect to your
PC.
ActiveSync does not
function when your
Pocket PC is connected
to your PC with a USB
cable.
Cannot access the
Internet.
Resetting
Resetting is equivalent to restarting a PC. Reset your Pocket PC when a
button or tapping the screen does not respond. When your Pocket PC is
reset, all data that was not stored during operation is deleted.
If the functionality cannot be restored even if the reset
NOTE
switch is pressed, initialize your Pocket PC. See "Clearing
Memory " on page 44.
When the power is on, use the stylus to press and hold the reset switch, and
then release it.
- 42-
Chapter 5: Additional Information
Cause
Some
malfunction
The screen light
is off.
setting is
incorrect.
—
The USB driver
on your PC may
not be
compatible.
The
communication
settings are
incorrect.
Correction
Reset the device. If no
action is observed after
resetting the device,
initialize the device.
(However, the data will be
deleted.)
Press and hold the power
button until the screen light
is turned on.
Tap
> Settings >
System > Screen light to
adjust the screen
brightness for better sight.
See ActiveSync Help.
Re-select the USB driver.
Carry out correct settings.
Advertisement
Table of Contents
