Table of Contents
Advertisement
24 www.electrolux.com
Installing the shelf supports
Install the shelf supports in the opposite se-
quence.
LAMP
Before you change the lamp:
• Deactivate the appliance.
• Remove the fuses from the fuse box or
deactivate the circuit breaker.
Replacing the lamp at the cavity
ceiling:
1.
2.
DeluxeAppliances - EUappliances.com
2
1
Valid for telescopic runners:
The retaining pins on the telescopic
runners must point to the front.
WARNING!
There is a risk of electrical shock.
The lamp and the lamp glass cover
can be hot.
CAUTION!
Put a cloth on the bottom of the in-
terior of the appliance. It prevents
damage to the lamp glass cover
and the cavity.
Always use the same lamp type.
Turn the lamp glass cover counter-
clockwise to remove it.
Clean the glass cover.
2.
Pull the rear end of the shelf support
away from the side wall and remove it.
3.
Replace the lamp with a suitable 300
°C heat-resistant lamp.
4.
Install the glass cover.
Replacing the lamp on the left side of
the cavity.
1.
Remove the left shelf support.
2.
Use a narrow, blunt object (e.g. a tea-
spoon) to remove the glass cover.
Clean the glass cover.
3.
Replace the lamp with a suitable 300
°C heat-resistant lamp.
4.
Install the glass cover.
5.
Install the left shelf support.
Advertisement
Table of Contents
