Clock Functions - Electrolux EOC5851AO User Manual

CLOCK FUNCTIONS

Symbol
If you set the time for a clock function, the
time starts to count down after 5 seconds.
Setting the clock functions
1.
2.
3.
4.
• With Duration and End Time you must
set the heating function and the temper-
ature first. Then you can set the clock
function. The appliance deactivates au-
tomatically.
• You can use Duration and End Time at
the same time, if you want to automati-
cally activate and deactivate the appli-
ance on a given time later.
• When you use the Core Temperature
Sensor (if applicable), the Duration and
End Time functions do not work.
DeluxeAppliances - EUappliances.com
Function
Minute Minder
Duration
End Time
If you use the clock functions Dura-
tion and End Time , the appliance
deactivates the heating elements
after 90 % of the set time. The ap-
pliance uses the residual heat to
continue the cooking process until
the time ends (3 - 20 minutes).
Set a heating function.
Press again and again until the dis-
play shows the necessary clock func-
tion and the related symbol.
Press or to set the necessary
time. Press OK to confirm. When the
time ends, an acoustic signal sounds.
The appliance deactivates. The display
shows a message.
Press a sensor field to stop the signal.
Useful information:
Description
To set a countdown (max. 2 h 30 min). This function
has no effect on the operation of the appliance. You
can also activate it when the appliance is deactivated.
Use to activate the function. Press
set the minutes and OK to start.
To set how long the appliance has to be in operation
(max. 23 h 59 min).
To set the switch-off time for a heating function (max.
23 h 59 min).
HEAT + HOLD
The Heat + Hold function keeps prepared
food warm at 80 °C for 30 minutes. It acti-
vates after the baking or roasting proce-
dure ends.
• You can activate or deactivate the func-
tion in the Basic Settings menu.
• Conditions for the function:
– The set temperature is more than 80
°C.
– The function Duration is set.
Activating the function
1. Activate the appliance.
2. Select the heating function.
3.
Set the temperature above 80 °C.
4.
Press
play shows Heat + Hold . Press OK to
confirm.
When the function ends, an acoustic signal
sounds.
The Heat + Hold function stays on if you
change the heating functions.
EXTRA TIME
The Extra Time makes the heating function
continue after the Duration ends.
• Applicable for all heating functions with
Duration or Weight Automatic .
• Not applicable for heating functions with
the core temperature sensor.
ENGLISH
or
Useful information:
again and again until the dis-
15
to