Advertisement
LAYOUT AND STORAGE (cont.)
display shelves
flat shelves
top view
8
BEFORE USING YOUR WINE CELLAR
• Remove the exterior and interior packing.
• Before connecting the Wine Cellar to the power source, let it stand upright for approxi-
• Clean the interior surface with lukewarm water using a soft cloth.
• Install the handle on the left side of the door.
INSTALLATION OF YOUR WINE CELLAR
• This appliance is designed for free standing installation or built-in (fully recessed).
• Place your Wine Cellar on a floor that is strong enough to support it when it is fully loaded.
• Locate the Wine Cellar away from direct sunlight and sources of heat (stove, heater, radi-
• Avoid locating the unit in moist areas.
• Plug the Wine Cellar into an exclusive, properly installed-grounded wall outlet. Do not
side view
INSTALLATION
mately 2 hours. This will reduce the possibility of a malfunction in the cooling system from
handling during transportation.
To level your Wine Cellar, adjust the front leveling leg at the bottom of the Wine Cellar.
ator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase
electrical consumption. Extreme cold ambient temperatures may also cause the unit not to
perform properly.
under any circumstances cut or remove the third (ground) prong from the power cord. Any
questions concerning about power and/or grounding should be directed toward a certified
electrician or an authorized products service center.
5
Advertisement
