Advertisement
INSTALLATION
INSTALLATION DIAGRAM FOR THE BUILT-IN MODELS
• Level the unit inside the cabinet.
• Open the door of the unit at a 90°angle.
• Fix the facing of the kitchen cabinet on the door of the unit (8 screws included).
• Be sure the gasket seals properly.
4
LAYOUT AND STORAGE (cont.)
SLIDING SHELF
To move a sliding shelf:
1. Remove all bottles
2. Pull out the shelf
3. Refit them as show below instruction
4. Move out the shelf
RECOMMENDATIONS FOR LAYOUT AND STORAGE OF YOUR WINE CABINET
Your cabinet was designed to store a maximum number of bottles in total security. We
recommend that you observe the tips below to optimize loading.
- Spread your bottles out as evenly as possible over the shelves, so that weight is not
concentrated in one point, Also make sure your bottles do not touch the back of the
cabinet, or the step at bottom.
- Also make sure that bottles are not all grouped together at the top or bottom of the
cabinet.
- Observe the loading instructions provided in LAYOUT AND STORAGE, according to the
type of storage fixtures with which your cabinet is equipped, and never stack bottles on a
sliding shelf.
- Never try to pull out more than one sliding shelf at a time.
PLEASE NOTE
Before modifying your cabinet's original configuration in any way, be sure to ask your
dealer for advice.
9
Advertisement
