Table of Contents
Advertisement
Connector Name
BNC connector
Power connector
RS-232 Connector
Digital Input Terminal
RJ-45 Ethernet port
C. Descriptions of Ports (RS-232 and Digital Input)
Digital Input: To connect external devices such as infrared sensors. There are 2 pairs of
isolated input ports.
Pin Name
S1+, S1-
&
S2+, S2-
To connect VersaCam IC Series to an Audio Device.
RS-232:
Output internal video signal through a coaxial cable.
To supply power from the provided power supply unit
(12VDC, 1.5A)
To connect external devices such as a device for audio
transmission.
To connect external sensors.
To connect 10 Base-T Ethernet cable.
See Appendix 7 for details.
S1+
S1-
To connect external devices such as infrared sensors.
Solid State Relay (Optically isolated)
- Current
. Typical: 16mA
. Maximum: 20mA (Maximum Rating: 60mA)
- Pulse time
. Minimum: 200msec
- Internal resistor: 330 ohm
RX
Description
S2+
S2-
Description
TX
GND
4
Remarks
VersaCam IC-360 User's Guide
Advertisement
Table of Contents
