Using Caller Id; Responding To Call Waiting; Making A Three-Way Call - Audiovox Sprint PCS Vision VI600 User Manual

Using Caller ID

Displays the incoming caller's name and phone number, if it is stored
in your phone book.
Note:
The caller ID is stored in the call history.

Responding to Call Waiting

Notifies you of another incoming call when you are on the phone by
making a beep sound and displaying the caller's phone number on
the screen.
To answer another call while on the phone, press
(This places the first call on hold. To switch back to the first
caller, press
Tip:
For those calls where you don't want to be interrupted, you can
temporarily disable Call Waiting by pressing
your call. Call Waiting is automatically reactivated once you end the call.

Making a Three-Way Call

With Three-Way Calling, you can talk to two people at the same time.
When using this feature, the normal airtime rates will be applied for
each of the two calls.
1. Enter a number you wish to call and press
2. Once you have established the connection, enter the second
number you wish to call and press
caller on hold and dials the second number.)
3. When you're connected to the second party, press
begin your three-way call.
If one of the people you called hangs up during your call, you and the
remaining caller stay connected. If you initiated the call and are the
first to hang up, all three callers are disconnected.
Tip:
You can also begin a Three-Way Call by displaying a phone number
stored in your internal Phone Book, Call History, or Messaging. To call the
third party, press
Note:
Call Waiting and Three-Way Calling are not available while roaming off
the enhanced Sprint Nationwide PCS Network.
Section 3: Using PCS Service Features
3A: PCS Service Features – The Basics
again.)
.
before placing
.
. (This puts the first
.
again to
83