Stop/Tail Lights, Back-Up Light, Rear Fog Light And Rear Turn Signal Lights - Toyota AYGO Manual

336
7-3. Do-it-yourself maintenance
Stop/tail lights, back-up light, rear fog light and rear turn signal
■
lights
1 Open the back door and
remove the 2 screws, and
remove the lamp assembly
by pulling it directly backward
from the rear of the vehicle.
2 Turn the bulb base counter-
clockwise.
1
Stop/tail light
2
Back-up light or rear fog
light
3
Rear turn signal light
3 Remove the light bulb.
1
Stop/tail light
2
Back-up light or rear fog
light
3
Rear turn signal light
4
When installing the light bulb, install by conducting
with the directions reversed.
5
Install the lamp assembly
and then install the 2 screws.
Align the guide (
( ) on the lamp assembly with
2
the mounting when installing it.
AYGO_EE_OM99J92E
) and pins
1
3 2
and