Pentax Optio W20 Operating Manual page 167

8
Press the 4 button twice.
The screen returns to the [u Setting] menu.
Check that [Alarm] is set to O (On).
9
Press the 4 button.
[Alarm is set] appears and the camera turns
off.
Checking the Alarm
1
Use the four-way controller (23) to select [Alarm] on
the [H Setting] menu.
Check that [Alarm] is set to O (On).
2
Press the four-way controller (5).
The Alarm screen appears.
Check the alarm frequency and time.
3
Press the 3 button twice.
The camera returns to capture status.
Turning the Alarm Off
The Clock mode screen appears and the alarm
rings for one minute when the set time is
reached while the camera is turned off.
You can stop the alarm by pressing any button
on the camera while the alarm is ringing.
The alarm will not ring if the camera is on when the set time is
reached.
Setting
Format
Sound
Date Adjust
09/25/2006
Alarm
World Time
MENU Exit Exit Exit
Alarm 14:25
Alarm Once
Time 17:30
MENU Cancel
1/4
OK OK
8
165