Pentax Optio W10 Operating Manual page 88

• In y mode, the focus mode is set to s.
• In A mode, you can only select = and q.
Saving the Focus Mode 1p.103
Manual Focus
The procedure for setting the focus manually (\) is described below.
1
Press the four-way controller (5)
in A mode.
2
Use the four-way controller (5) to
select \ and press the 4 button.
4
The central portion of the image is
magnified to fill the screen of the LCD
monitor when focusing.
3
Press the four-way controller
(23).
The \ indicator appears on the LCD
monitor to indicate the approximate
distance to the subject. Use the four-way
controller (23) to adjust the focus using
the indicator as a guide.
2 : for distant focus
3 : for closer focus
4
Press the 4 button.
The focus is fixed and the camera returns to capture status.
In addition, the focus position is fixed five seconds after you remove
your finger from the four-way controller (5).
After the focus is fixed, you can press the four-way controller (5) again
to display the \ bar and readjust the focus.
To switch from \ to another focus mode, press the four-way
controller (5) while the \ bar is displayed.
Capture mode and drive mode cannot be changed while the \ bar
is displayed.
86
Focus Mode Focus Mode Focus Mode
Manual Focus Manual Focus Manual Focus
2m 2m 2m
1 1
0.5 0.5 0.5
\ indicator
OK OK OK OK
38 38 38
OK OK OK
OK