Adding A Frame (Frame Composite) - Pentax Optio W10 Operating Manual

Adding a Frame (Frame Composite)

This function lets you add a decorative frame to still pictures. There are
three frames already stored in the camera.
1
Enter the Q mode and use the four-way controller (45)
to choose the image to which you want to add a frame.
2
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller (2345) to select Y
(Frame Composite).
4
Press the 4 button.
A 9-frame display of the frame selection
screen appears.
5
Use the four-way controller
(2345) to choose a frame.
6
Press the 4 button or y on the
Zoom/f/y button.
The selected frame appears in single-image
display.
You can choose another frame using either
of the following operations.
• Use the four-way controller (45) to
choose a different frame.
• Press the 3 button or f on the Zoom/f/y button to return to
the 9-frame display of the frame selection screen, and then perform
Step 5 to choose a different frame.
6
1, 2, 3, 5, 9
4, 6, 7, 8, 10
Slideshow Slideshow Slideshow
Guide Guide Guide
MENU
MENU
MENU
OK OK OK
OK
6
OK OK OK
OK
OK OK OK
OK
139