Setting The Sensitivity - Pentax Optio S6 Operating Manual

Setting the Sensitivity

You can select the sensitivity to suit the brightness of the surroundings.
Sensitivity
4
Auto The sensitivity is automatically set in the range from 64 to 200.
• The lower the sensitivity (the lower values), the sharper the image and
64
100
• The higher the sensitivity (the higher values), the faster the shutter
200
400
1
Press the MENU button in Capture mode.
The [A Rec.Mode] menu appears.
2
Use the four-way controller (23)
to select [Sensitivity].
3
Press the four-way controller (5).
The pull-down menu appears.
4
Use the four-way controller (23)
to change the sensitivity.
5
Press the shutter release button
halfway.
The camera is ready to take the picture.
You can select 800 for Sensitivity in Candlelight mode.
88
the less noise. The shutter speed will be slower in low light conditions.
speed in low light conditions to reduce camera shake, but the image
may be affected by noise.
Saving the Sensitivity
Shutter release
button
MENU
Four-way
controller
MENU button
p.100
1
Rec. Mode
Recorded Pixels 6
M
Quality Level
White Balance AWB
AF Setting
AE Metering
Sensitivity Auto
MENU Exit
Rec. Mode
Recorded Pixels 6
M
Quality Level
White Balance AWB
AF Setting
AE Metering
Sensitivity Auto
MENU Exit
Rec. Mode
Recorded Pixels 6
M
Quality Level Auto
White Balance AWB 64
AF Setting 100
AE Metering 200
Sensitivity Auto 400
MENU Cancel OK OK