Lane Departure Warning (Ldw) System - Alfa Romeo giulia Owner's Handbook Manual

LANE DEPARTURE WARNING
(LDW) SYSTEM
DESCRIPTION
50) 51) 52) 53)
The Lane Departure Warning system
makes use of a camera located on the
windscreen to detect the lane limits and
calculate the position of the vehicle
within such limits, in order to make sure
that it remains inside the lane.
When one or both lane limits are
detected and the vehicle passes over one
without the driver's say-so (direction
indicator not turned on), the system
emits an acoustic signal.
If the vehicle continues to go beyond the
line of the lane without any intervention
from the driver, the surpassed line will
light up on the display (left or right) to
urge the driver to bring the vehicle back
into the limits of the lane.
SYSTEM ACTIVATION/DEACTIVATION
The system is activated/deactivated by
pressing the button, fig. 182
When the engine is started the system is
always activated.
182
Activation conditions
Once switched on, the system becomes
active only if the following conditions are
met:
the vehicle speed is above 37 mph
(60 km/h);
the lane limit lines are visible at least
on one side;
there are suitable visibility conditions;
the road is straight or with wide radius
bends;
a suitable distance is kept from the
vehicle in front;
the direction indicator (for leaving the
lane) is not active.
SYMBOLS AND MESSAGES ON THE
DISPLAY
The Lane Departure Warning system also
advises the driver when the vehicle
changes lane by showing symbols and
messages on the instrument panel
display fig. 183.
183
07226S0001EM
When the system is active and the lane
limits have not been detected, the display
shows a specific grey icon, fig. 184.
184
07226S0002EM
07226S0007EM
169