Using The Self-Timer - Pentax Optio P70 Operating Manual

Optional Frames
The optional frames are stored in the built-in memory in the Optio P70. These
optional frames are deleted if the files on the built-in memory are deleted with a
computer or the built-in memory is formatted. To reload the optional frames into
the built-in memory, copy the files from the CD-ROM (S-SW87) supplied with
the camera (p.163).
Adding a Frame to a captured image 1p.161

Using the Self-timer

In Self-timer mode, the picture is taken ten seconds or two seconds after
the shutter release button is pressed.
Stabilize the camera with a tripod or other support when taking a picture
with the self-timer.
Use this mode when you want to be included in a group picture. The picture
g
is taken approximately ten seconds after the shutter release button is
pressed.
Use this mode to avoid camera shake. The picture is taken approximately two
Z
seconds after the shutter release button is pressed.
1
Press the four-way controller (2) in A mode.
Shutter release
button
Four-way controller
4 button
3
91