Setting The Instant Review - Pentax Optio P70 Operating Manual

Pentax digital camera operating manual
Hide thumbs Also See for Optio P70:
Table of Contents

Advertisement

6
Press the 3 button.
The camera returns to capture status.
Pixel Track SR does not function in the following situations:
- When C (Half-length Portrait), N (Frame Composite), X (Digital
Wide) or F (Digital Panorama) is selected as the shooting mode
- When g (Self-timer), j (Continuous Shooting) or K (Burst
Shooting) is selected as the drive mode
- When the flash discharges
- When the sensitivity is set to 1600 or higher
- During Movie or Voice Recording

Setting the Instant Review

Use this setting to specify whether or not an Instant Review is displayed
immediately after images are shot. The default setting is [1sec.] (displays
the image for 1 second).
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Instant
Review].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to select [1sec.] or [Off].
1sec.
Off
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture status.
Instant Review is displayed for
1 second.
Instant Review is not displayed.
Rec. Mode
2/3
EV Compensation
0.0
Movie
Blink Detection
Digital Zoom
Instant Review
1sec.
Memory
Off
Cancel
MENU
3
OK
OK
113

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents