Taking Stereo Pictures (3D Image Mode) - Pentax Optio S4 Operating Manual

Taking Stereo Pictures (3D Image Mode)

You can take 3D pictures using the LCD monitor and view them by the
parallel method or cross method (p.65). If you print out the 3D pictures
and look at them through the 3D image viewer provided, the image will
appear in three dimensions.
Select the viewing mode.
The default setting is [Parallel]. If you do not need to switch to [Cross],
go to Step 5.
1
Press the MENU button.
The [ Rec. Mode] menu will be displayed.
A
2
Press the four-way controller (
to select [3D Mode].
3
Use the four-way controller (
to select [Parallel].
To view the picture with the 3D image
viewer, select [Parallel].
You can also view it without the image
viewer.
4
Press the OK button.
The 3D image mode screen appears again.
Take the pictures
5
Press the four-way controller (
The virtual mode dial appears.
6
Use the four-way controller (
( ) at the top of the dial.
G
8, 10
2, 3, 5, 6
4, 7
1
)
23
Rec. Mode
Digital Zoom
Instant Review
)
45
Fast Fwd Movie
3D Mode
Memory
Sharpness
Exit
MENU
) in Capture Mode.
3
) to display the 3D mode
45
4
On
2sec
Off
Parallel
Ok
OK
63