Changing The Start-Up Screen - Pentax Optio S4 Operating Manual

How to recall the [

Changing the Start-up Screen

You can display an image recorded with the camera as the welcome
screen when the camera is turned on.
1
Select [Start-up Screen] on the [
2
Press the four-way controller (
3
Press the Display button.
4
Use the four-way controller (
you want to display as the start-up screen.
5
Press the OK button.
6
Use the four-way controller (
7
[Off].
P
7
Press the OK button twice.
The camera is ready to take or play back images.
Once the welcome screen has been set, it will not be erased even if
the original image is deleted or the SD Memory Card /
MultiMediaCard is formatted.
98
Set-up] menu
B
Four-way controller
OK button
Menu button
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
Exit
MENU
Set-up] menu.
B
).
5
) to choose the image
45
) to select
45
2304 1728
AWB
Multiple
Auto
Ok
OK
[On] or
O