Setting The Shake Reduction For Still Pictures - Pentax Optio A20 Operating Manual

Setting the Shake Reduction for Still Pictures

To use the shake reduction function for still pictures (p.51), you need to set
[Shake Reduction] to [O (On)] in the [
4
1
Press the MENU button in Capture mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to
select [Shake Reduction].
3
Use the four-way controller (45) to
select [O (On)/P (Off)].
:
O (On)
Off) :
P (
4
Press the shutter release button halfway.
The camera is ready for taking pictures.
You can also select On/Off using the Green button. This function
cannot be used when assigning a function other than Shake
Reduction to the Green button. (
98
Shutter release
button
Four-way
controller
MENU button
(Shake Reduction On) is
displayed on the capture screen.
(Shake Reduction Off) is displayed on the capture
screen.
Recorded Pixels
MENU
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
MENU
A Rec. Mode] menu.
EV Compensation
Movie
Shake Reduction
Digital Zoom
Instant Review
Memory
MENU
1
p.100)
Rec. Mode
10
M
AWB
AUTO 800
Exit
Rec. Mode
±0.0
0.5sec 0.5sec
Exit