Table of Contents
Advertisement
[ALERT SOUND]
Touch screen operation, start and stop of recording can be confirmed with this sound.
When [OFF] is selected, the sound is not output at the start/end of recording, etc.
[OFF]/
(Volume low)/
2 Beeps for 4 times
When an error occurs. Check the message displayed on the screen.
[ECONOMY (BATT)]
When about 5 minutes have passed without any operation, this unit automatically turns off to save
battery life.
[ON]/[OFF]
≥ This unit will not automatically turn off even if the [ECONOMY (BATT)] is set to [ON] in following
cases:
j PRE-REC is used
j When [USB MODE SELECT] is set to [DEVICE] and this unit is connected to a PC.
[ECONOMY (AC)]
When connected to AC adaptor about 15 minutes have passed without any operation, this unit
automatically turns off.
[ON]/[OFF]
≥ This unit will not automatically turn off even if the [ECONOMY (AC)] is set to [ON] in following
cases:
j PRE-REC is used
j When [USB MODE SELECT] is set to [DEVICE] and this unit is connected to a PC.
[SYSTEM FREQ]
Set the system frequency of this unit.
[USB MODE]
Enable/disable connections to the USB terminals of this unit.
[ON]/[OFF]
[USB MODE SELECT]
The unit's USB terminal to which a USB Cable will be connected can be switched.
Switch the terminal according to the shape of the USB Cable's plug you intend to connect to the
unit.
[HOST]:
For connecting to the USB HOST terminal (Type A) of the unit
[DEVICE]:
For connecting to the USB DEVICE terminal (Type Micro-B) of the unit
(Volume high)
(l
95, 183)
(l
95, 183)
(l
160)
(l
102)
- 197 -
(l
206)
(l
(l
133)
133)
Advertisement
Table of Contents
