Pentax MZ-60 Operating Manual page 69

4
???????????????????????
??????????????????????
????
• When the shutter release button is depressed halfway down,
the shutter speed and aperture value will be displayed on the
LCD panel.
* Exposure Warning
If the subject is too bright or
too dark, the plus
minus
indicator in the viewfinder and
the selected aperture value on
the LCD panel would blink
slowly. When the subject is
too bright, choose a faster shutter speed. If it is too dark, choose
a slower shutter speed. When the selected aperture value stops
blinking, you can take the picture. If both selected shutter speed
and aperture blink, it means that the exposure is out of metering
range, unable to obtain a correct exposure even if the shutter
speed is adjusted. Select a darker subject if the subject is too
bright. Use a flash if it is too dark.
or
67