Step 9. Rewinding A Film In Mid-Roll; Step 9 Rewinding A Film In Mid-Roll - Pentax MZ-60 Operating Manual

Step 9
REWINDING A FILM IN MID-ROLL
If you wish to unload the film before exposing all the frames, use
this function.
1
Set the main switch to the
ON position, Depressing the
Drive mode button for over
2seconds, Film status
information
appear on the LCD.
2
Holding the drive mode
button and depress the
shutter release button to
start rewinding.When the
film is fully rewound, only
blinks on the LCD
panel.
• The film will be rewound, Film
status information on the LCD
panel blinks and counts the
frame numbers in reverse.
• Before opening the back cover,
check that
will
is blinking.
45