Pentax K 100D Super Operating Manual page 199

Problem
AE lock is not
AE lock function
available when set to
does not
a (Manual) mode or
operate
p (Bulb) mode
When flash mode is
set to [Auto
discharge] or [Auto
flash+Redeye
reduct], the flash will
not discharge if the
subject is bright
Flash does not
Mode dial is set to
discharge
a (Flash OFF)
H (Scene) mode
is set to A (Night
Scene),
K (Sunset),
D (Candlelight) or
E (Museum)
The power
The camera does
zoom system
not have the power
does not
zoom function
function
The transfer mode is
USB connection
set to [PictBridge]
with computer
An error occurred
does not work
while sending USB
properly*
data
USB connection
with printer does The transfer mode is
not work set to [PC] or [PC-F]
properly
Cause
Use AE lock with any setting other than a
(Manual) mode or p (Bulb) mode.
Set flash mode to [Manual discharge] or
[Manl flash+Redeye reduct]. (p.54)
Set mode dial to any setting other than
a (Flash OFF). (p.50)
Set H (Scene) mode to any setting other
than A (Night Scene), K (Sunset),
D (Candlelight) or E (Museum). (p.50)
Use manual zoom. (p.53)
Set transfer mode to [PC].
Change the transfer mode to [PC-F].
Set transfer mode to [PictBridge]. (p.89)
Remedy
197
6