Specifications - JVC KS-DR3004 Instruction Manual

SPECIFICATIONS

SPECIFICATIONS
Power Output
Normal Mode: 60 W RMS × 4 channels at 4 Ω and
≤ 1% THD + N
Signal-to-Noise Ratio: 80 dBA (reference: 1 W into 4 Ω)
Power Output
Normal Mode: 90 W RMS × 4 channels at 2 Ω and ≤ 1% THD + N
Bridge Mode: 180 W RMS × 2 channels at 4 Ω and ≤ 1% THD + N
Maximum Power Output
800 W
Load Impedance
Normal Mode: 4 Ω (2 Ω to 8 Ω allowance)
Bridge Mode: 4 Ω (4 Ω to 8 Ω allowance)
Frequency Response
5 Hz to 50,000 Hz ( +0 dB, –3 dB)
Input Sensitivity/Impedance
2 V/21 kΩ (0.2 V to 5 V, variable)
Distortion
Less than 0.04% (at 1 kHz)
Power Requirement
DC 14.4 V (11 V to 16 V allowance)
Grounding system
Negative ground
Dimensions (W×H×D)
322 mm × 52 mm × 185 mm
(12-11/16 in. × 2-1/16 in. × 7-5/16 in.)
Mass (approx.)
2.1 kg (4.7 lbs)
Accessories
Speaker input connector 4P × 2
Mounting Screw Ø 4 (3/16 in.) × 20 mm (13/16 in.) × 4
Design and specifications are subject to change without notice.
English