Advertisement
Quick Links
X-10 Transmitter and Receiver Instructions
Section I.
Installation Instructions..............................................................................2
Section II. Operating Instructions ...............................................................................3
Section III. Troubleshooting ........................................................................................4
Attention Installer.
This manual contains important information about the installation, operation and safe use of this product.
This information should be given to the owner/operator of this equipment. If you have any questions or
need additional free copies of these instructions, please call (800) 831-7133.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
No changes or modifications may be made to the units. Any changes made to the unit will void the user's authority to
operate the equipment.
Pentair Pool Products
1620 Hawkins Ave., Sanford, NC 27330 • (919) 774-4151
10951 West Los Angeles Ave., Moorpark, CA 93021 • (805) 523-2400
Rev. A 12-5-03
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Table of Contents
Important Notice
Important Notice
1
P/N 840344
Advertisement
Related Manuals for Pentair X-10
Summary of Contents for Pentair X-10
- Page 1 X-10 Transmitter and Receiver Instructions IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS Section I. Installation Instructions...2 Section II. Operating Instructions ...3 Section III. Troubleshooting ...4 Attention Installer. This manual contains important information about the installation, operation and safe use of this product.
- Page 2 Using The X-10 Remote Control If an X-10 system is present prior to this installation, module settings for this unit must be adjusted to allow for settings already in use. See operating instructions for directions on how to change manufacturer default settings and then adjust the installation settings accordingly.
- Page 3 If the unit is cycled off then on it may take up to 3-4 minutes for the lamp to “restrike” or come back on. All metal halide lamps have this characteristic and this is a normal function of the PG2000. Rev. A 12-5-03 X-10 Keychain Remote Figure 2. NOTE...
- Page 4 PG2000 switches. In order to verify the codes in the PG2000, the cover must be removed. Pentair Pool Products 1620 Hawkins Ave., Sanford, NC 27330 • (919) 774-4151 10951 West Los Angeles Ave., Moorpark, CA 93021 • (805) 523-2400 P/N 840344 0.5A...