Linksys X2000 User Manual page 192

Linksys X2000/X3000
RADIUS Server Enter the IP address of the RADIUS server .
RADIUS Port Enter the port number of the RADIUS server . The default is 1812 .
Shared Key
Enter the key shared between the router and the server .
WEP
WEP is a basic encryption method, which is not as secure as WPA .
NOTE
If you select WEP as your Security Mode, each device in your
wireless network MUST use WEP and the same encryption and
shared key .
Encryption Select a level of WEP encryption, (40/64-bit 10 hex digits) or
104/128-bit (26 hex digits) . The default is 40/64-bit (10 hex digits) .
Passphrase
Enter a passphrase to automatically generate WEP keys . Then
click Generate .
Key 1-4 If you did not enter a passphrase, enter the WEP key(s) manually .
TX Key Select a default TX (Transmit) Key to use . The default is 1 .
RADIUS
This option features WEP used in coordination with a RADIUS server . (This
should only be used when a RADIUS server is connected to the router .)
NOTE
If you select RADIUS as your Security Mode, each device in your
wireless network MUST use RADIUS and the same encryption and
shared key .
RADIUS Server Enter the IP address of the RADIUS server .
RADIUS Port Enter the port number of the RADIUS server . The default is 1812 .
Shared Secret Enter the key shared between the router and the server .
Encryption Select a level of WEP encryption, (40/64-bit 10 hex digits) or
104/128-bit (26 hex digits) . The default is 40/64-bit (10 hex digits) .
Passphrase Enter a passphrase to automatically generate WEP keys . Then
click Generate .
Key 1-4 If you did not enter a passphrase, enter the WEP key(s) manually .
TX Key Select a default TX (Transmit) Key to use . The default is 1 .
Advanced Configuration
20