Advertisement
Quick Links
Waterproof Standalone Proximity Reader
EASIPROX
I.
Product Characteristic:
Easiprox has a 2000 cards capacity and a reading time of 0.5-second max.
Fully Programmable via Master card
Electronics potted with epoxy compound applications
Aesthetic and inconspicuous design
Suitable for fully weatherized indoor/outdoor
Non-volatile memory stores all programmed information for at least 10 years, even in the
event of total power failure.
II.
Specifications:
Operating Voltage
Current Draw
Transmitting Frequency
Memory Volume
Read Range
Relay Electric Current
Relocking timer
Format
Case Material
Color
Operating Temperature
Ambient Humidity
Visual Signals
EMC
Copyright © Gianni Industries, Inc. All Rights Reserved.
P-MU-EASIPROX Ver. B Published on 2008.02.12
EASIPROX
12Vdc or ac
Average 45mA, Peak 70mA @ 12Vdc
125 KHz
2000 Proximity cards/tokens and PIN codes
10~15 cm (Depending on local installation conditions)
3A MAX @24Vdc
Strike Time: 0.7~42 seconds (adjustable)
Em-400x 64-bit standard R/O or compatible
ABS (UL94V0)
Dark gray
℃
-20~+70
5~95% relative humidity non-condensing
3 LED display with audible indication (Red/Yellow/Green)
Meet CE requirement
EASIPROX-ANSI
Page: 1/ 4
Advertisement
Summary of Contents for GEM EASIPROX-ANSI
- Page 1 EASIPROX Waterproof Standalone Proximity Reader EASIPROX EASIPROX-ANSI Product Characteristic: Easiprox has a 2000 cards capacity and a reading time of 0.5-second max. Fully Programmable via Master card Electronics potted with epoxy compound applications Aesthetic and inconspicuous design Suitable for fully weatherized indoor/outdoor Non-volatile memory stores all programmed information for at least 10 years, even in the event of total power failure.
- Page 2 III. The indicator signal chart: Signal Condition Yellow Power on, Stand-by User Signals Green Lock relay active Invalid Card Yellow、Green Flashing The memory is empty Green Flashing Into the ADD CARDS MODE Flashing Into the DELETE CARDS MODE Programming Yellow、Red Flashing Into the CLEAR MEMORY MODE Signals...
-
Page 3: Clear Memory
Operation Instruction WARNING: Please read all of operation instruction before proceeding. Setting Master Card If the GREEN and YELLOW lamps are flashing, it indicates that the memory is empty and that there is no Master Card. All programming is done by using this Master Card. Add Cards Read the Master Card once→... - Page 4 Card Simulator / Programmer (optional) The Card Simulator allows adding and removing any card/card number from the reader memory when the card is lost or not available. One unit can be utilized at different sites but for security reasons it will operate only in conjunction with the Master Card. The Card Simulator / Programmer cannot be used to gain access.