Error And Status Register Error Logs - DEC DECstation 5000 Model 200 Maintenance Manual

Error and status register error logs

Error and status register error logs record nonmemory errors.
This is a sample of the error log sections that are unique to
error and status register error logs.
----- ERROR & STATUS REGS -----
CAUSE
INTERRUPT
STATUS
SP
KN02 STAT REG
ERROR ADDR REG
PHYSICAL ERROR ADDR x1EC00000
x80002000
EXCEPTION CODE EXTERNAL
HW INTERRUPT 3 PENDING
BRANCH DELAY SET
x0000FE04 CURRENT INTERRUPT STATE DISABLED
CURRENT MODE KERNEL
PREVIOUS INTERRUPT STATE ENABLED
PREVIOUS MODE KERNEL
OLD INTERRUPT STATE DISABLED
OLD MODE KERNEL
SW INTERRUPT 1 ENABLED
HW INTERRUPT 0 ENABLED
HW INTERRUPT 1 ENABLED
HW INTERRUPT 2 ENABLED
HW INTERRUPT 3 ENABLED
HW INTERRUPT 4 ENABLED
HW INTERRUPT 5 ENABLED
CACHE STATE NORMAL
xFFFFDC58
x05C20001 IO INT 0 PENDING
19,200 BAUD
8 MB MEM MODULE
ECC CMD x0
IO INT 1 ENABLED
IO INT 6 ENABLED
IO INT 7 ENABLED
NORMAL MODE
REFRESH ODD MEM MODULES
UNSECURE
xE7B00000
CPU I/O WRITE TIMEOUT
Troubleshooting Tools 3–13