To Remove A Thinwire Terminator; To Install A Thinwire Terminator; Removing And Installing A Thinwire Ethernet Terminator - DEC DECstation 5000 Model 200 Maintenance Manual

To Remove a ThinWire Terminator

Twist the collar on the ThinWire T-connector as far as
1.
possible to the left.
Pull the T-connector off of the system unit connector.
2.

To Install a ThinWire Terminator

Press a terminator onto each unused end of the T-connector.
1.
Turn the terminator to the right until it locks into place.
Push the T-connector collar onto the ThinWire connector on
2.
the system unit.
Turn the T-connector collar to the right until it slips past
3.
the connector tabs and slides into place.
ThinWire T-connector
ThinWire terminators
Figure 2-6. Removing and installing a ThinWire Ethernet terminator
2–12 Service Operations
d i
g i t l a
0
PM AG
-C
1
PM AZ
-A
2
PM AD
-A
3
2
ThinWire Ethernet connector
V~ 10 0-1
20 A 3.0
V~ 22 0-2
40 A 1.7
V~ 10 0-
12 0/2 20
A 7.9 /4.
-2 40
2
Hz 50 -6
0
W 35 9
WSE2M009