Gigaset Maxwell 10 Administration Manual page 10

First steps
Ethernet configuration
¤
Tap on Ethernet Configuration.
If the network connection is established, the configu-
ration information, e.g. the IP address, is displayed.
If the network connection has not been established
automatically, you can enter the configuration data
manually.
Proxy configuration
When a connection to internal or external network
resources is made via a proxy server, you must enter
the proxy server data. Proxy settings are used by the
browser but may not be used by other apps.
¤
Tap on Proxy Configuration. Enter the data of
your proxy server.
Connecting via WLAN
¤
On the Start screen tap on
¤
Select Wi-Fi Drag switch by Wi-Fi to the
right to switch on WLAN function.
The phone attempts to connect with a WLAN in
range. Once a connection has been established, you
will see the WLAN icon in the toolbar. It displays the
signal strength.
A list of WLANs in range of your phone is displayed.
An icon indicates the signal strength. Secure net-
works are identified with a lock icon.
¤
If necessary, tap on
update the list.
¤
Tap on the desired WLAN. Enter password/net-
work key.
¤
Tap on Connect.
Adding another WLAN
WLANs that are not in range or that withhold the SSID and are therefore not displayed in the list can
be entered manually. You will require the network name (SSID), the security protocol used and the
network key. Once the tablet is in range of one of these WLANs, the connection is established.
¤
Select Wi-Fi Tap on
¤
Select security protocol (None, WEP, WPA/WPA2 PSK, 802.1x EAP).
¤
Enter password/network key. Save.
10
to open the list of available apps. Select
context menu SCAN to
Enter Network SSID.
Configure Ethernet device
Network Type
IPV4
IPV6
Connection Type
DHCP
Static IP
IP address
Netmask
DNS address
Gateway address
Save
Settings
WIRELESS & NETWORKS
Ethernet
Wi-Fi
Bluetooth
WiFi 100
Signal strength Fair
Security
Password
Show password
Show advanced options
Cancel
Cancel
Settings.
ON
ON
OFF
Connect