Unpacking And Inspection; Figure 2 - Shipped With Printer - AMT Datasouth Fastmark 600 Series User Manual

UNPACKING AND INSPECTION

This section is provided to assist you in removing the printer from the shipping container and
setting it up in the application environment. Inspect the shipping carton and contact the shipping
carrier directly to report any suspected damage.
1. With the shipping container in the upright position, remove the top foam packing
material.
2. Carefully, lift the printer straight up out of the box.
3. Remove the printer from the plastic bag and place the printer on a flat stable surface.
4. Remove the accessory kit and supplies.
5. Inspect the shipping container and the printer for any damage that may have occurred
during shipping.
Note: Save the box and all packing materials for future use, in the event the
printer needs to be shipped.
approved packaging may void the warranty or increase repair costs
due to shipping damage.
Verify that the printer box contains the following materials when unpacking:
a. Printer
b. Media Hanger
c. AC Power Cord
d. CD that contains User's manual, Windows drivers, and Printer Utilities
e. A sample media roll with a sample ribbon roll and a take-up ribbon core
f. Two Ribbon Core adapters for ribbon cores that are smaller than 4.325 inches in width.
Printer
Power Cord
CD
8
Units returned for service in non-
Sample Media
Figure 2 – Shipped with Printer
Sample Ribbon
Media Hanger
Ribbon Core Adapter
User Manual