Panasonic DMR-ES10EB Service Manual page 20

DMR-ES10EB / DMR-ES1 0EC / DMR-ES1 0EG / DMR-ES1 0EP / DMR-ES10EBL
Mode name
Turn on all FL/LEDs All segments of FL and all LEDs are turned
on.
PB HIGH Signal Output 8 pin of AV 1 Jack (PB HIGH terminal) is High
(approx. 11V DC).
PB MIDDLE Signal 8 pin of AV 1 Jack (PB HIGH terminal) is
Output Middle (approx. 5.5V DC).
Front connection Press all front keys and check the connection
inspection between Main P.C.B. and Front key Switches.
Production Date Display Display the date when the unit was produced.
Display the accumlated Display the accumulated unit´s working time.
working time
Display the Error History Display the Error History stored on the unit.
Delete the Error History Delete Error History information stored on the
unit.
AV4(V) / AV1(RGB) I/O Set input to AV4 (V) and set output to AV1
Setting (RGB) for I/O checking
AV2(Y/C) / AV1(V) I/O Set input to AV2 (Y/C) and set output to AV1
Setting (V) for I/O checking
AV2(V) / AV1(Y/C) I/O Set input to AV2 (V) and set output to AV1
Setting (Y/C) for I/O checking
AV2(RGB) / AV1(V) I/O Set input to AV2(RGB) and set output to
Setting AV1(V) for I/O checking
Item
Description
FL display
All segments are turned on.
(1) Each time a key is pressed,
segment turned on increases one
by one.
(2) Total umber of keys that have
been pressed.
YYYY: Year
MM: Month
DD: Day
(Indicating unit: Second)
Display reason of error for 5
seconds.
Display the time when the error has
occurred for 5 seconds..
YY: Year
MM: Month
DD: Day
HH: Hour
MM: Minute
Accumulated working time
occuring of the error is
displayed.
(Indicating unit: Second)
Key operation
(Remote controller key)
Press [5] [1] in service mode.
Press [5] [2] in service mode.
Press [5] [3] in service mode.
Press [5] [4] in service mode.
Press [6] [1] in service mode.
Press [6] [4] in service mode.
Press [6] [5] in service mode.
Then press [0] [1] ~ [1] [9], the past
19 error histories are displayed.
till
left
Press [9] [7] in service mode.
Press [8] [0] in service mode.
Press [8] [1] in service mode.
Press [8] [2] in service mode.
Press [8] [3] in service mode.